General Information

Type of service provider
Testing laboratory
Short description
Eko-Studio-Projekt sh.p.k. is a multidisciplinary environmental consulting and laboratory firm based in Tirana, Albania, established in 2010. The company specializes in environmental permitting, impact assessments, occupational health and safety, and laboratory testing of air, water, soil, microclimate, paper, cardboard, plastic film, textile, leather and emissions. It holds ISO certifications (9001, 14001, 45001, 31000) and operates an ISO/IEC 17025:2017 accredited laboratory. Eko-Studio-Projekt sh.p.k. offers professional consulting services and technical support in acquiring environmental permits, licenses, and complying with a wide range of national and international standards. Our mission is to support public organizations and private sector in meeting regulatory obligations while promoting sustainable practices. Its advanced instruments and experienced team ensure high-quality services in environmental monitoring, reporting, and risk management.
Physical postal address

Gjergj Fishta Boulevard no.48
1001
Tirane
Albania

Phone number
+355 688439581
+355692077227
E-mail
eko.laborator [at] gmail.com
eko.projekt [at] yahoo.com
eko_studio [at] yahoo.com
Legal Status
Private
Has the laboratory been accredited in any scopes?
Yes
Scopes of Accreditation
The laboratory of Eko-Studio-Projekt sh.p.k. is ISO/IEC 17025:2017 accredited and equipped with modern, high-precision instruments designed for environmental monitoring and analysis. It performs accredited testing on air quality, water (industrial and natural), soil, noise, microclimate parameters, analytical testing of paper and cardboard materials, plastic films, textiles and leather and emissions from stationary sources. The lab uses advanced technology such as gas chromatographs, ion chromatography, UV-VIS spectrophotometers, atomic absorption spectrometers, and indoor environmental quality monitoring systems. This setup ensures reliable, standards-compliant data collection for environmental reporting, permit compliance, and occupational health assessments.
Accreditation body
The General Directorate of Accreditation of Albania
Does the laboratory have other sites?
No

Personnel

Chief Executive Officer (CEO) / Head of Organization

CEO Name
Shkelzen Madani
CEO Phone
+355 692077227
CEO E-mail
eko_studio [at] yahoo.com

Total laboratory personnel

Total laboratory personnel
8
Male laboratory personnel
2
Female laboratory personnel
6

Technical personnel

Technical personnel total
7
Male technical personnel
1
Female technical personnel
6

Technical Information

Testing

Laboratory services offered
Civil engineering and construction
Biological
Chemical
Water / food
Environmental
Other
Scope of services offered
Test object or product tested or matrices
Ergonomics of the thermal environment
Test parameter/ properties measured
Air temperature
Type of test/ instrumentation used
Thermoigrometric
Methods
SSH EN ISO 7730:2005
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Aluminum, Bromide, DEHA, Iodine , Manganese, Molibden, Ozon, Potassium, Silicon dioxide, Sulfide, Sulfite, Total phosphorus, Zinc


Type of test/ instrumentation used
Filter photometer
Methods
BS 1427:2009
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Nitrate

Type of test/ instrumentation used
Filter photometer
Methods
AL400/MaxiDirect_2 – 265
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Orthophosphates
Type of test/ instrumentation used
Filter photometer
Methods
AL400/MaxiDirect_2 – 321
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
BOD5
Type of test/ instrumentation used
Respirometry
Methods
APHA Method 5210 D
S SH EN 5815 – 1 : 2003
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Boron
Type of test/ instrumentation used
Filter photometer
Methods
BS 1427:2009
SMEWW – 4500-B C.
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Chlorides
Type of test/ instrumentation used
Filter photometer
Methods
BS 1427:2009
SMEWW Method 4500-Clˉ G
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Chlorine dioxide
Type of test/ instrumentation used
Filter photometer
Methods
BS 1427:2009
SMEWW -4500-ClO2 D.
Accreditation status
No
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Cyanide
Type of test/ instrumentation used
Filter photometer
Methods
BS 1427:2009
AL400/MaxiDirect_2:157.
EPA Method 335.4:1993
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Fluoride
Type of test/ instrumentation used
Filter photometer
Methods
BS 1427:2009
APHA AWWA WER – 4500 – F – D
AL400/MaxiDirect_2:170.
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Nitrite
Type of test/ instrumentation used
Filter photometer
Methods
BS 1427:2009
SMEWW 4500-NO2- B.
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Sulfate
Type of test/ instrumentation used
Filter photometer
Methods
BS 1427:2009
SMEWW – SO42- E
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
TDS
Type of test/ instrumentation used
Potentiometric
Methods
BS 1427:2009
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Total nitrogen
Type of test/ instrumentation used
Filter photometer
Methods
BS 1427:2009
AL400/MaxiDirect_2:280/281
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Iron
Type of test/ instrumentation used
Filter photometer
Methods
BS 1427:2009
SSH ISO 6332:1996
Accreditation status
Yes
Test object or product tested or matrices
Air quality
Test parameter/ properties measured
CO, CO2, CH4, H2S
Type of test/ instrumentation used
AMS
Methods
EN 45544 -1 : 2015
EN 50271
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Grease and oil
Type of test/ instrumentation used
Gravimetric
Methods
EPA Method 1664 rish.B
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
MBAS
Type of test/ instrumentation used
Filter photometer
Methods
EPA Method 5540 C
Accreditation status
No
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
pH
Type of test/ instrumentation used
Potentiometric
Methods
ISO 10523:2008
Accreditation status
Yes
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Whiteness
Type of test/ instrumentation used
VIS
Methods
ISO 11475:2004
Accreditation status
No
Test object or product tested or matrices
Air quality
Test parameter/ properties measured
PM 1, PM 10, PM 5
Type of test/ instrumentation used
Laser beam diffraction 5mW, 785nm
Methods
ISO 14644‐1:2015
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate
Type of test/ instrumentation used
UV-VIS
Methods
ISO 15923-1:2017
Accreditation status
Yes
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Diffuse reflectance factor
Type of test/ instrumentation used
CIE illuminant
Methods
ISO 2469:2007
Accreditation status
No
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Opacity
Type of test/ instrumentation used
Diffuse reflectance
Methods
ISO 2471: 1998
Accreditation status
No
Test object or product tested or matrices
Air quality
Test parameter/ properties measured
O2
Type of test/ instrumentation used
AMS
Methods
ISO 50104:2002
EN 45544 -1:2015
Accreditation status
Yes
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Thickness, density and specific volume
Type of test/ instrumentation used
Micrometer
Methods
ISO 534:2005
Accreditation status
Yes
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Grammage
Type of test/ instrumentation used
Weighing
Methods
ISO 536:2019
Accreditation status
Yes
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Roughness/ Smoothness
Type of test/ instrumentation used
Bendtsen method
Methods
ISO 8791-2: 2013
Accreditation status
No
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Conductivity
Type of test/ instrumentation used
Potentiometric
Methods
S SH EN 27888:1993
Accreditation status
Yes
Test object or product tested or matrices
Acoustics
Test parameter/ properties measured
Noise exposure
Type of test/ instrumentation used
Engineering method
Methods
S SH EN ISO 9612:2009
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
COD
Type of test/ instrumentation used
Filter photometer
Methods
S SH ISO 15705:2013
Accreditation status
Yes
Test object or product tested or matrices
Acoustics
Test parameter/ properties measured
Environmental noise
Type of test/ instrumentation used
Sound pressure levels
Methods
S SH ISO 1996-2 :2017
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Total, differential and free copper
Type of test/ instrumentation used
Filter photometer
Methods
SMEWW 3500-Cu B
AL400/MaxiDirect_2:150-153
BS 1427:2009
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
DO
Type of test/ instrumentation used
Electrode methode
Methods
SMEWW 4500-O G.
SMEWW 4500-O H.
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Water temperature
Type of test/ instrumentation used
Digital thermometer
Methods
SMEWW Method 2550–B.
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Chromium
Type of test/ instrumentation used
UV-VIS
Methods
SMEWW Method 3500-Cr D
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Hydrocarbons
Type of test/ instrumentation used
Gravimetric
Methods
SMEWW Method 5520 F.
Accreditation status
Yes
Test object or product tested or matrices
Air quality
Test parameter/ properties measured
PM10, PM2,5 Mass concentration of suspended particulate matter
Type of test/ instrumentation used
Gravimetric
Methods
SSH EN 12341:2014
Accreditation status
Yes
Test object or product tested or matrices
Stationary source emissions
Test parameter/ properties measured
Low range mass concentration of dust
Type of test/ instrumentation used
Gravimetric
Methods
SSH EN 13284-1:2017
SSH EN 13284-2:2017
Accreditation status
Yes
Test object or product tested or matrices
Stationary source emissions
Test parameter/ properties measured
Temperature and water vapour in ducts
Type of test/ instrumentation used
AMS
Methods
SSH EN 14790:2017
Accreditation status
Yes
Test object or product tested or matrices
Stationary source emissions
Test parameter/ properties measured
Water vapor in the Chimney
Type of test/ instrumentation used
AMS
Methods
SSH EN 14790:2017
Accreditation status
Yes
Test object or product tested or matrices
Stationary source emissions
Test parameter/ properties measured
SO2
Type of test/ instrumentation used
AMS
Methods
SSH EN 14791:2017
EN 50379-1
EN 50379-2
Accreditation status
Yes
Test object or product tested or matrices
Stationary source emissions
Test parameter/ properties measured
NOx
Type of test/ instrumentation used
AMS
Methods
SSH EN 14792:2017
EN 50379-1
EN 50379-2
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Arsenic
Type of test/ instrumentation used
UV-VIS
Methods
SSH EN 26595:2006
Accreditation status
No
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+
Type of test/ instrumentation used
IC
Methods
SSH EN ISO 14911:1999
Accreditation status
No
Test object or product tested or matrices
Mechanical vibration
Test parameter/ properties measured
Human exposure to hand-transmitted vibration
Type of test/ instrumentation used
Vibration Meter
Methods
SSH EN ISO 5349-1/2
Accreditation status
No
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Turbidity
Type of test/ instrumentation used
Turbidimeter
Methods
SSH EN ISO 7027-1:2016
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Combined, total and free Chlorine, Monocloramine
Type of test/ instrumentation used
Filter photometer
Methods
SSH EN ISO 7393-2 : 2018
AL400/MaxiDirect_2:100
Accreditation status
Yes
Test object or product tested or matrices
Ergonomics of the thermal environment
Test parameter/ properties measured
Wind speed in the air
Type of test/ instrumentation used
Anemometer
Methods
SSH EN ISO 7730:2005
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Water color
Type of test/ instrumentation used
Filter photometer
Methods
SSH EN ISO 7887:2011
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Escherichia coli and coliform bacteria
Type of test/ instrumentation used
Enumeration
Methods
SSH EN ISO 9308-3:2012
Accreditation status
No
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Hydrocarbon oil index
Type of test/ instrumentation used
Chromatography
Methods
SSH EN ISO 9377-2:2000
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Total and Composite alkalinity
Type of test/ instrumentation used
Titration
Methods
SSH EN ISO 9963-1:1999
Accreditation status
Yes
Test object or product tested or matrices
Soil and solid material
Test parameter/ properties measured
pH
Type of test/ instrumentation used
Potentiometric
Methods
SSH ISO 10390:2005
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Chromium VI
Type of test/ instrumentation used
UV-VIS
Methods
SSH ISO 11083:1994
Accreditation status
Yes
Test object or product tested or matrices
Soil and solid material
Test parameter/ properties measured
Conductivity
Type of test/ instrumentation used
Potentiometric
Methods
SSH ISO 11265:1994/Cor 1:1996
Accreditation status
Yes
Test object or product tested or matrices
Soil and solid material
Test parameter/ properties measured
Dry matter and water content
Type of test/ instrumentation used
Gravimetric
Methods
SSH ISO 11465: 2001
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
TSS
Type of test/ instrumentation used
Gravimetric
Methods
SSH ISO 11923:1997
Accreditation status
Yes
Test object or product tested or matrices
Stationary source emissions
Test parameter/ properties measured
CO, CO2, O2
Type of test/ instrumentation used
AMS
Methods
SSH ISO 12039:2001
EN 50379-1
EN 50379-2
Accreditation status
Yes
Test object or product tested or matrices
Mechanical vibration and shock
Test parameter/ properties measured
Human exposure to whole-body vibration
Type of test/ instrumentation used
Vibration Meter
Methods
SSH ISO 2631-1/5
Accreditation status
No
Test object or product tested or matrices
Mechanical vibration and shock
Test parameter/ properties measured
Vibration of fixed structures
Type of test/ instrumentation used
Vibration Meter
Methods
SSH ISO 4866:2010
Accreditation status
No
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Calcium
Type of test/ instrumentation used
Titration
Methods
SSH ISO 6058 : 1984
BS 1427:2009
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Total hardness and magnesium
Type of test/ instrumentation used
Titration
Methods
SSH ISO 6059 : 1984
BS 1427:2009
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Phenol index
Type of test/ instrumentation used
UV-VIS
Methods
SSH ISO 6439:1996
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Ammonia
Type of test/ instrumentation used
UV-VIS
Methods
SSH ISO 7150-1:1984
Accreditation status
Yes
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Intestinal enterococci
Type of test/ instrumentation used
Membrane filtration
Methods
SSH ISO 7899-2:2000
Accreditation status
No
Test object or product tested or matrices
Natural & Industrial water
Test parameter/ properties measured
Chlorides
Type of test/ instrumentation used
Titration
Methods
SSH ISO 9297:1989
BS 1427:2009
Accreditation status
Yes
Test object or product tested or matrices
Cleanrooms and associated controlled environments
Test parameter/ properties measured
PM0.3, PM0.5, PM1 , PM2.5, PM5, PM10
Type of test/ instrumentation used
Diffraction of laser beams. 5mW, 785nm,
Methods
SSH EN ISO 14644-1:2015
Accreditation status
Yes
Test object or product tested or matrices
Water Quality (Natural & Industrial)
Test parameter/ properties measured
Cobalt
Chrome
Cooper,
Iron
Manganese
Nickel
Lead
Type of test/ instrumentation used
AAS
Methods
ISO 15586:2003
Accreditation status
No
Test object or product tested or matrices
Soil quality
Test parameter/ properties measured
Soil temperature measurement
Type of test/ instrumentation used
NiCr-NiAl
Methods
ISO 4974:2023
Accreditation status
Yes
Test object or product tested or matrices
Soil quality
Test parameter/ properties measured
Determination of dry matter and water content on a mass basis
Type of test/ instrumentation used
Gravimetric method
Methods
SSH ISO 11465:2001
Accreditation status
Yes
Test object or product tested or matrices
Soil, treated biowaste and sludge
Test parameter/ properties measured
Determination of pH
Type of test/ instrumentation used
Potenciometric
Methods
SSH EN ISO 10390:2022
Accreditation status
Yes
Test object or product tested or matrices
Soil quality
Test parameter/ properties measured
Determination of the specific electrical conductivity
Type of test/ instrumentation used
Potenciometric
Methods
SSH ISO 11265:2001
Accreditation status
Yes
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Determination of thickness, density and specific volume
Type of test/ instrumentation used
Gravimetric
Methods
SSH EN ISO 534:2011
Accreditation status
Yes
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Determination of grammage
Type of test/ instrumentation used
Gravimetric
Methods
SSH EN ISO 536:2020
Accreditation status
Yes
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Determination of CIE whiteness
Type of test/ instrumentation used
D65/10 degrees
Methods
SSH ISO 11475:2017
Accreditation status
Yes
Test object or product tested or matrices
Paper, board and pulps
Test parameter/ properties measured
Determination of pH of aqueous extracts
Type of test/ instrumentation used
Cold extraction
Methods
SSH ISO 6588-1:2021
Accreditation status
Yes
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Determination of moisture content of a lot
Type of test/ instrumentation used
Oven-drying method
Methods
SSH EN ISO 287:2017
Accreditation status
Yes
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Determination of roughness/smoothness (air leak methods)
Type of test/ instrumentation used
Bendtsen method
Methods
SSH ISO 8791-2:2013
Accreditation status
No
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Determination of opacity (paper backing)
Type of test/ instrumentation used
Diffuse reflectance method
Methods
SSH ISO 2471:2008
Accreditation status
No
Test object or product tested or matrices
Paper, board, pulps and cellulose nanomaterials
Test parameter/ properties measured
Determination of residue (ash content) on ignition at 900 °C
Type of test/ instrumentation used
Gravimetric
Methods
SSH ISO 2144:2019
Accreditation status
No
Test object or product tested or matrices
Paper and board
Test parameter/ properties measured
Determination of alkali reserve
Type of test/ instrumentation used
Titration
Methods
SSH ISO 10716:2022
Accreditation status
No
Test object or product tested or matrices
Plastics — Film and sheeting
Test parameter/ properties measured
Determination of average thickness of a sample, and average thickness and yield of a roll
Type of test/ instrumentation used
Gravimetric thickness
Methods
ISO 4591:1992
Accreditation status
Yes
Test object or product tested or matrices
Plastics
Test parameter/ properties measured
Methods for determining the density of non-cellular plastics
Type of test/ instrumentation used
Immersion method, liquid pyknometer method and titration method
Methods
SSH EN ISO 1183-1:2019
Accreditation status
No
Test object or product tested or matrices
Textiles — Fabrics
Test parameter/ properties measured
Determination of width and length
Type of test/ instrumentation used
Measurement
Methods
SSH ISO 22198:2006
Accreditation status
Yes
Test object or product tested or matrices
Textiles
Test parameter/ properties measured
Determination of thickness of textiles and textile products
Type of test/ instrumentation used
Measurements
Methods
SSH ISO 5084:1997
Accreditation status
No
Test object or product tested or matrices
Textiles — Woven fabrics
Test parameter/ properties measured
Determination of mass per unit length and mass per unit area
Type of test/ instrumentation used
Measurements
Methods
SSH ISO 3801:1977
Accreditation status
Yes
Test object or product tested or matrices
Leather - Chemical tests
Test parameter/ properties measured
Determination of pH and difference figure
Type of test/ instrumentation used
Potenciometric
Methods
SSH EN ISO 4045:2018
Accreditation status
Yes
Test object or product tested or matrices
Leather
Test parameter/ properties measured
Determination of apparent density and mass per unit area
Type of test/ instrumentation used
Physical and mechanical test
Methods
SSH EN ISO 2420:2017
Accreditation status
No
Test object or product tested or matrices
Surface-active agents and detergents
Test parameter/ properties measured
Determination of water content
Type of test/ instrumentation used
Karl Fischer methods
Methods
SSH ISO 4317:2011
Accreditation status
No
Test object or product tested or matrices
Animal and vegetable fats and oils
Test parameter/ properties measured
Determination of water content
Type of test/ instrumentation used
Karl Fischer method (pyridine free)
Methods
SSH EN ISO 8534:2017
Accreditation status
No
Does the laboratory conduct sampling, upon request of the client, of products to be tested?
Yes

Proficiency Testing

Does the lab participate in proficiency testing for accredited scopes
Yes
Does the lab participate in proficiency testing for non-accredited scopes
Yes
PT Scheme details
Each year the laboratory participates in various PT schemes to cover its entire scope of measurement at the end of each four-year period. These schemes vary from year to year depending on the demand of the laboratory for quality control tests.
Does the laboratory sub-contract testing work to other laboratories?
No

Quality Control / Quality Management

Does the lab operate an internal quality control (QC) system to ensure quality of test results?
Yes
Does the lab operate a management system (or Quality Management System) for assuring the quality of results?
Yes
Is the system documented in a Quality Manual?
Yes
© UNIDO Knowledge Hub 2026|website by webshapers.cc